MLRC Forum - Pointers for install Power for HAM in a WRX

05/11/25 at 23:22:36

	Welcome, Guest. Please Login or Register

MLRC Forum › General › Rally › Pointers for install Power for HAM in a WRX

(Moderators: BryceB, John_Vanos, Derek Vincent, Bruce VA3BRS, Phil Jeffries)

‹ Previous Topic | Next Topic ›

Pages: 1

Send Topic

Print

Pointers for install Power for HAM in a WRX (Read 2920 times)

Dave Cotie God Member Offline Posts: 838 North Bay, Ontario	Pointers for install Power for HAM in a WRX 06/12/12 at 18:57:19 Anyone have some information they can share on installing a HAM Radio in a '02 WRX? From what I can see the grommets in the firewall are stuck behind the intercooler. Can you go through behind the fender liner where most of the wiring appears to go?
Back to top	Dave Cotie VA3 COT IP Logged

RyanHuber God Member Offline Posts: 709 Ontario	Re: Pointers for install Power for HAM in a WRX Reply #1 - 06/12/12 at 19:35:23 Dave, have a look and see if there's a grommet under the brake booster, right above the frame rail. That's the one I usually runs things through on my car, it comes out above and behind the pedals, I'm just not sure if there's one in the same spot on that generation car.
Back to top	Ryan Huber VA3AWD IP Logged

Bruce VA3BRS YaBB Moderator Offline Posts: 81 Scarborough	Re: Pointers for install Power for HAM in a WRX Reply #2 - 06/12/12 at 19:51:28 Dave, watch this and see if this is the same as your car. http://www.youtube.com/watch?v=1oEhmTe0oco
Back to top	IP Logged

Dave Cotie God Member Offline Posts: 838 North Bay, Ontario	Re: Pointers for install Power for HAM in a WRX Reply #3 - 06/12/12 at 19:58:27 Thanks for the quick responses guys! Off to the garage!
Back to top	Dave Cotie VA3 COT IP Logged

Dave Cotie God Member Offline Posts: 838 North Bay, Ontario	Re: Pointers for install Power for HAM in a WRX Reply #4 - 06/13/12 at 21:28:01 . . . . . and done! Thanks again guys.
Back to top	Dave Cotie VA3 COT IP Logged

Pages: 1

Send Topic

Print

‹ Previous Topic | Next Topic ›

MLRC Forum » Powered by YaBB 2.2.3!
YaBB © 2000-2008. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge