MLRC Forum - More Questions...

05/15/25 at 14:29:19

	Welcome, Guest. Please Login or Register

Home

Help

MLRC Forum › General › Rally › More Questions...

(Moderators: Derek Vincent, BryceB, Phil Jeffries, John_Vanos, Bruce VA3BRS)

‹ Previous Topic | Next Topic ›

Pages: 1

More Questions... (Read 2481 times)

j_burton

YaBB Newbies

Offline

Posts: 9
Milton

More Questions...
11/05/11 at 20:05:00

Hello everyone! I am finally going to do this! I have a 1990 Coupe Quattro that I am going to use for rallyX. I have read through the regulations, and am just going to ask a few questions to be clear. The car I am using is in decent shape, but there is a hole in one of the qaurter panels. Is this an issue that has to be fixed? I am going to trailer the car, as it is only going to be used for competition. My other questions pertain to the service area. Is there power there for tools and such? Or are we useing hand tools only?

Thanks to all for the help, and I look forward to meeting all of you!

Jarred

« Last Edit: 11/07/11 at 19:24:33 by j_burton »

IP Logged

Dave Cotie God Member Offline Posts: 838 North Bay, Ontario	Re: More Questions... Reply #1 - 11/05/11 at 21:11:52 Holes in the bodywork don't matter, as long as they aren't massive. I think there is ONE outside plug. Most people are using battery powered gear or hand tools.
Back to top	Dave Cotie VA3 COT IP Logged

Taras YaBB Newbies Offline Posts: 8 Toronto	Re: More Questions... Reply #2 - 11/06/11 at 16:56:02 Cool! Another Audi 90 in rallyX.
Back to top	IP Logged

j_burton YaBB Newbies Offline Posts: 9 Milton	Re: More Questions... Reply #3 - 11/28/11 at 19:29:49 So, the rules say that a rallyx car should be able to pass a safety. Does that meen it has to have all of it's lights installed?? What if all the turn/tail/marker lights were removed? Is this ok?
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board