MLRC Forum
https://www.mlrc.ca/cgi-bin/yabb/YaBB.pl General >> Rally >> Subaru Experts - Re Timing Belt - Get in here! https://www.mlrc.ca/cgi-bin/yabb/YaBB.pl?num=1441046399 Message started by Dave Cotie on 08/31/15 at 13:39:59 |
Title: Subaru Experts - Re Timing Belt - Get in here! Post by Dave Cotie on 08/31/15 at 13:39:59 So what would cause this? (Supposed to be a fairly new belt with only about 40k on it) |
Title: Re: Subaru Experts - Re Timing Belt - Get in here! Post by jason on 09/02/15 at 11:55:53 It appears the the timing belt guard over the crank is not adjusted properly. |
Title: Re: Subaru Experts - Re Timing Belt - Get in here! Post by Dave Cotie on 09/08/15 at 11:26:13 Jason VE3JCB wrote on 09/02/15 at 11:55:53:
Ok thanks, I have the motor out and will pull the rest of the cover off to look. |
Title: Re: Subaru Experts - Re Timing Belt - Get in here! Post by Poisson on 09/08/15 at 19:13:31 Oohh.. You are not lucky ! |
Title: Re: Subaru Experts - Re Timing Belt - Get in here! Post by Dave Cotie on 10/13/15 at 18:39:46 So I haven't pulled the front cover off, but I have pulled both of the inspection covers. The timing belt up at the top is tight, but near the bottom is fairly loose (it will deflect a good 1/2 inch). Is this normal? Or am I going to need tensioners too? |
Title: Re: Subaru Experts - Re Timing Belt - Get in here! Post by Dave Cotie on 10/17/15 at 06:03:53 Everything is good now! |
MLRC Forum » Powered by YaBB 2.2.3! YaBB © 2000-2008. All Rights Reserved. |